Operating Room Sandwich Panel Installation Process Guide
? Step 1: Site preparation and measurement before installing operating room sandwich panelBefore hoisting the operating room sandwich panel, construction teams should level the base wall and check the flatness of the ground. Accurate on-site measurement is essential to customize the size of each operating room sandwich panel. Any uneven substrate will cause gaps after panel assembly, which can hide bacteria and affect the cleanliness of the clean operating room.
? Step 2: Layout marking and keel fixing for operating room sandwich panelMark the installation lines according to construction drawings, then fix the supporting keel firmly. The keel system bears the weight of the operating room sandwich panel, especially ceiling operating room sandwich panel. Weak keel support will lead to panel deformation in the later stage. At this stage, you can consult SAMZOON technical engineers to verify the keel load requirement matched with your operating room sandwich panel.
? Step 3: Assemble operating room sandwich panel and adjust flatness Place each operating room sandwich panel onto the keel, align the panel joints carefully and adjust vertical and horizontal flatness. Avoid hard knocking on the surface of the operating room sandwich panel, as impact may scratch the coating or dent the panel. SAMZOON operating room sandwich panel adopts precise edge joint design for easier assembly.
? Step 4: Joint sealing of operating room sandwich panelSeam treatment is the most critical step for operating room sandwich panel. Apply medical-grade sealant in panel gaps to achieve airtight effect and block bacterial growth. Poor sealing is one of the main reasons for clean operating room acceptance failure. SAMZOON can share standard sealing operation specifications for operating room sandwich panel with your construction team.
? Step 5: Inspection and protection of installed operating room sandwich panelAfter all operating room sandwich panel installation completes, inspect all surfaces and seams. Protect finished operating room sandwich panel during subsequent construction work to prevent scratches and contamination.
? Key Tip: Do not cut corners on sealing work of operating room sandwich panel. SAMZOON offers construction technical guidance for customers purchasing operating room sandwich panel, helping purification engineering teams avoid common installation defects. We also support urgent delivery of operating room sandwich panel to keep your project schedule on track.
