How Much Do Factory Renovation Panels Cost? 5 Key Price Factors
❓ Q1: How much does a factory renovation panel cost per square meter?
✅ A: Factory renovation panel pricing typically ranges from ¥70 to ¥250 per square meter — but the actual price depends on five key factors:
| ? Price Range | ?️ Typical Specification | ? Notes |
|---|---|---|
| ¥70-110/m² | 50mm, foam core, color-coated surface | General workshop partition |
| ¥110-160/m² | 50-75mm, PU/rock wool core, color-coated surface | Food processing, general industrial |
| ¥160-220/m² | 75-100mm, rock wool/magnesium core, stainless steel surface | Cleanrooms, chemical plants |
| ¥220+/m² | 100mm+, high-performance core, 316L stainless steel | Pharmaceutical, aggressive chemicals |
⚠️ Key insight: Price per square meter alone is not a reliable comparison metric — the specification (core material, thickness, surface, fire rating) must be matched for a fair comparison.
? SAMZOON provides transparent pricing based on your specific specification requirements, with free samples for physical verification.
❓ Q2: How does core material affect the price of factory renovation panels?
✅ A: Core material is the single largest price driver for factory renovation panels:
| ? Core Material | ? Relative Price | ? Fire Rating | ? Moisture Resistance | ?️ Typical Application |
|---|---|---|---|---|
| Foam | ✅ Lowest | Class B2 | ⚠️ Basic | General workshop partition |
| PU | Moderate | Class B1 | ✅ Excellent | Food processing, cold storage |
| Rock Wool | Higher | Class A | ⚠️ Requires hydrophobic treatment | Cleanrooms, chemical plants |
| Magnesium | Higher | Class A | ✅ Good | High-humidity cleanrooms |
| Magnesium-Rock Wool Composite | Moderate | Class A | ✅ Better | Cleanrooms, hospitals |
⚠️ Key insight: Core material determines fire rating and moisture resistance — the choice depends on your project's fire acceptance path and humidity conditions.
? SAMZOON provides factory renovation panels with verified core materials, with test reports covering your ordered specification.
❓ Q3: How does thickness affect the price of factory renovation panels?
✅ A: Thickness directly affects the amount of core material and surface material used per panel:
| ? Thickness | ? Relative Price | ?️ Typical Application |
|---|---|---|
| 50 mm | ✅ Lowest | General workshop partition |
| 75 mm | Moderate | Food processing, general industrial |
| 100 mm | Higher | Cleanrooms, chemical plants |
| 150 mm | Highest | Cold storage, special applications |
⚠️ Key insight: For general factory renovation, 50-75mm is often sufficient — thicker panels are only needed for specific fire ratings, thermal performance, or acoustic requirements.
❓ Q4: How does surface material affect the price of factory renovation panels?
✅ A: Surface material is the second largest price driver after core material:
| ? Surface Material | ? Relative Price | ?️ Typical Application |
|---|---|---|
| ? Color-Coated Steel | ✅ Lowest | General workshop partition |
| ? Galvanized Steel | Moderate | General industrial |
| ? 304 Stainless Steel | Higher | Food processing, cleanrooms |
| ? 316L Stainless Steel | Highest | Chemical plants, pharmaceutical |
⚠️ Key insight: Stainless steel surfaces add significant cost but offer corrosion resistance, cleanability, and durability — critical for food processing, chemical, and pharmaceutical applications.
❓ Q5: How does order volume affect the price of factory renovation panels?
✅ A: Order volume affects unit price through production efficiency and material procurement:
| ? Order Volume | ? Price Impact | ? Notes |
|---|---|---|
| Small (<500 m²) | ⚠️ Higher unit price | Setup cost spread over fewer panels |
| Medium (500-2,000 m²) | Moderate | Standard production run |
| Large (2,000-10,000 m²) | ✅ Lower unit price | Economies of scale |
| Very Large (10,000+ m²) | ✅ Lowest unit price | Custom production scheduling |
⚠️ Key insight: For urgent projects, expedited scheduling may add a premium — but a reliable source manufacturer can often accommodate urgent orders without excessive surcharges.
❓ Q6: How to avoid hidden costs when purchasing factory renovation panels?
✅ A: Common hidden costs to watch for:
╔═════════════════════════════════════════════════════════════════════════════╗ ║ HIDDEN COSTS IN FACTORY RENOVATION PANEL PROCUREMENT ║ ║ ║ ║ ┌─────────────────────────────────────────────────────────────────────┐ ║ ║ │ ⚠️ ACCESSORIES NOT INCLUDED │ ║ ║ │ → Corner profiles, sealants, connection accessories │ ║ ║ │ → Ask for a complete system quote, not just panel price │ ║ ║ ├─────────────────────────────────────────────────────────────────────┤ ║ ║ │ ⚠️ CUTTING AND FABRICATION │ ║ ║ │ → Non-standard sizes, openings, special cuts │ ║ ║ │ → Confirm whether cutting is included or charged separately │ ║ ║ ├─────────────────────────────────────────────────────────────────────┤ ║ ║ │ ⚠️ INSTALLATION COST │ ║ ║ │ → Labor, equipment, site preparation │ ║ ║ │ → Confirm whether installation is included or charged separately │ ║ ║ ├─────────────────────────────────────────────────────────────────────┤ ║ ║ │ ⚠️ DELIVERY AND LOGISTICS │ ║ ║ │ → Long-distance shipping, urgent delivery │ ║ ║ │ → Confirm delivery terms and cost upfront │ ║ ║ ├─────────────────────────────────────────────────────────────────────┤ ║ ║ │ ⚠️ TECHNICAL SUPPORT │ ║ ║ │ → Installation guidance, site support │ ║ ║ │ → Confirm whether technical support is included │ ║ ║ └─────────────────────────────────────────────────────────────────────┘ ║ ╚═════════════════════════════════════════════════════════════════════════════╝
? SAMZOON provides transparent pricing including panels, accessories, cutting, and technical support — with free samples and project selection guidance.
? Key Takeaways
? Factory renovation panel pricing typically ranges from ¥70 to ¥250 per square meter — depending on core material, thickness, surface material, fire rating, and order volume.
? Core material is the single largest price driver — foam is cheapest; PU offers good thermal performance; rock wool and magnesium offer Class A fire rating.
? Thickness affects the amount of core and surface material used — 50-75mm is often sufficient for general factory renovation.
? Surface material is the second largest price driver — stainless steel surfaces add cost but offer corrosion resistance and cleanability for demanding environments.
? Order volume affects unit price through production efficiency — larger orders typically receive better pricing.
? SAMZOON provides transparent pricing based on your specification, with free samples and project selection guidance for South China projects.
